sliding bearing
英 [ˈslaɪdɪŋ ˈbeərɪŋ]
美 [ˈslaɪdɪŋ ˈberɪŋ]
网络 滑动轴承; 滑动轴承轴承; 滑動軸承; 滑动支承; 滑动轴承装配
双语例句
- As the engineering ceramics have good heat resistance, corrosion, rubbing performance, so the sliding bearing magnetic pump to use more production of engineering ceramics.
由于工程陶瓷具有很好的耐热、耐腐蚀、耐摩擦性能，所以磁力泵的滑动轴承多采用工程陶瓷制作。 - Analysis on Measurement Approach for Lubricant Film Thickness of Sliding Bearing
滑动轴承润滑油膜厚度测量方法分析 - The so-called controllability coefficients were proposed to analyze the controllability of an active hybrid sliding bearing.
针对动静压混合滑动轴承，分析了主动节流轴承的可控性，并提出以可控性系数来加以衡量。 - The result shows that oil-film whirl of sliding bearing with the turbine generator is easily influenced by the boundary conditions.
针对某船用汽轮发电机组出现的振动异常情况，通过机组振动测试分析，确定机组振动异常由轴承油膜涡动引起。 - The extending end is supported by one sliding bearing and two rolling bearings which get lubricated by grease.
伸出端由一个滑动轴承和一对滚动轴承支承，滚动轴承用油脂润滑。 - Sliding bearing instead of the conventional rolling bearing, making pump working more smoothly with very little vibration and noise.
用滑动轴承替代常规电机滚动轴承，使泵具有运行特别平稳，振动噪音极低。 - Its working life is limited because the sliding bearing seal is used and the friction exists in the regenerator of traditional Stifling cooler.
传统的斯特林制冷机回热器使用接触式滑动密封，存在磨损，限制斯特林制冷机的使用寿命。 - Comparative Study on Wear Resistance of Sliding Bearing Alloys Under Grease Lubrication
脂润滑条件下滑动轴承合金耐磨性能的研究 - The combination bearing are assembled by a rolling bearing, a sliding bearing, a gland bush, a distance bushing and other relative fastening pieces.
该组合轴承由滚动轴承、滑动轴承、压盖、隔套、及相关紧固件组装而成。 - The idea of using split hydrostatic bearing as the support bearing of crankshaft in oxygen compressor to replace the split sliding bearing was proposed.
提出用剖分结构的静压轴承作为氧气压缩机曲轴支承轴承，取代轴瓦剖分形式的滑动轴承。 - The pumps include type A structure ( ball bearing) or type B structure ( sliding bearing).
泵的结构分为甲式结构（滚动轴承）和乙式结构（滑动轴承）。 - According to the output and speed, bearing has two types: rolling bearing and sliding bearing with non-stop oiling equipment.
轴承有滚动轴承和滑动轴承两种型式，依电机功率大小及转速而成，并设有不停机加油和排油装置。 - Because of its superior performance, the friction in friction application fields become best material, such as sleeve bearing, sliding bearing, the valve seat, seals, pump wear ring, etc.
因其优越的摩擦性能，在摩擦应用领域成为理想材料，如套筒轴承、滑动轴承、阀门座、密封圈、泵耐磨环等。 - This paper discusses the S1200-12 blower sliding bearing failure, accelerator gear noise, unit alignment accuracy of damage caused vibration leading to a variety of failure causes and treatment.
本文探讨了S1200-12鼓风机滑动轴承失效、增速器齿轮噪声大和振动大、机组找正精度破坏导致机组振动等多种故障原因及处理方法。 - Optimization Design of Hydrodynamic Sliding Bearing Used in Steam Turbine Based on Matlab
基于Matlab的汽轮机流体动压滑动轴承的优化设计 - By comparing on the manufacturing technology of the sliding bearing in different works, a new manufacturing technology is given so as to improve on the gluey condition of babbit of the sliding bearing.
滑动与滚动组合轴承比较不同工厂滑动轴瓦的制造工艺，提出新的工艺，从而改善滑动轴瓦锡基轴承合金的粘合情况。 - Distribution Rule Research on Temperature and Pressure in Sliding Bearing under Dynamics
滑动轴承动力学温度及压力分布规律研究 - The temperature of the sliding bearing and should refer to the pump's technical documentation, methods and deal with the same roller bearing.
对于滑动轴承的温度规定，应参阅有关泵的技术文件，处理方法与滚动轴承一样。 - Input pressure effects on the static and dynamic characteristics of hydrodynamic lubrication radial sliding bearing were investigated theoretically.
研究了供油压力对液体动压径向滑动轴承动静特性的影响。 - The difference, relation and applied conditions of some kinds of typical analytical models of sliding bearing nonlinear dynamic oil-film force were analyzed, a new analytical model was put forward.
分析了几种典型径向滑动轴承非线性动态油膜力解析模型之间的区别、联系及其相应的适用条件，提出了一种新的径向滑动轴承非线性动态油膜力解析模型。 - The pump axis is arranged in the alloy pump body through a sliding bearing and the sliding bearing is provided with a spiral oil groove so as to realize the requirement of bearing sliding lubrication.
通过泵轴通过滑动轴承安装在泵体内，并且该滑动轴承具有螺旋型油槽，可以实现轴承动润滑的要求。 - In case that other parameters keeping constant, improving effective velocity is an efficiency way to improve the bearing capacity of two moving surface hydrodynamic sliding bearing.
对于两表面都运动的推力滑动轴承，合理组合两运动表面的楔形方向和转向是提高有效速度的关键； - Comparative and Experimental Research on Typical Oil Film Force Analytical Models of Sliding Bearing
典型滑动轴承油膜力解析模型的对比分析及试验研究 - New type of anchorage and sliding bearing applied to MULTI-PRESTRESSED steel structures
适用于多次预应力钢结构的新型锚具和可滑移支座 - The sliding bearing does not bear force when a forcing press is in idle running and virtual travel, thereby greatly lowering the friction work of the sliding bearing.
由于滑动轴承在压力机空运转和空行程时不受力，大大降低了滑动轴承的摩擦功。 - To determine the theoretical value and practical value of radial clearance of sliding bearing was introduced with practical example.
通过实例介绍了滑动轴承径向间隙理论值和实际值的确定。 - This paper has studied a new technology of low temperature sliding bearing, namely ice layer lubrication.
本文在试验研究的基础上为机械工程提供了一种新技术：低温滑动轴承即冰层润滑技术。 - The compared testing with magnetic drive centrifugal inline pump structure located by sliding bearing is carried out.
并与采用滑动轴承定位的磁力传动离心管道泵结构进行了对比试验。 - The influence of radial clearance of sliding bearing on the superheat failure of bearing was expounded.
阐述了滑动轴承径向间隙对其本身过热故障的影响； - The thrust sliding bearing bears axial load, the bearing structure is largely determined by the working conditions.
推力滑动轴承承受轴向载荷，这样的工作条件很大程度上决定了轴承的结构。